– Constructed with Neodymium magnets allowing it to securely hold weapons weighing up to 50 lbs. Suitable for both parallel and perpendicular mounting.
– Compatible with nearly all gun types, including handguns, CCWs, rifles, shotguns, pistols, revolvers, and magazines.
– Lightweight and durable TPU cover allowing for safe, quick, and easy mounting without scratching, moving, and spinning.
– Double-sided adhesive tape, 4 heavy duty self-tapping screws, and 4 plastic anchors for quick, easy, and secure installation to avoid heavy duty concealed magnets falling.
– Allows you install and conceal heavy duty concealed magnets on any flat surface, including vehicle, wall, desk, door, safe, and bedside.
Non-drill Solution with 3M Tape
Step 1: Thoroughly clean the gun magnet and desired comfortable mounted area by rubbing alcohol and a clean cloth.
Step 2: Remove the protective liner of 3M tape.
Step 3: Stick 3M tape on the gun magnet.
Step 4: Remove red protective liner of 3M tape.
Step 5: Stick the gun magnet to the desired mounted area and secure it firmly in place for at least 60 seconds.
Drill Solution with Long Self-tapping Screws
Step 1: Mark the position for self-tapping screws.
Step 2: Pre-drilling holes for self-tapping screws.
Step 3: Putting plastic anchors into the holes.
Step 4: Fixing the gun magnet in place and screw down the self-tapping screws.
*Please refer to the non-drill solution if you use 3M tape simultaneously.